How Do You Put Up An Above-Ground Swimming Pool Wall?
Installing an above-ground pool wall can be very difficult if you try to do it alone. This is one project that requires a few extra hands to help. The problem is that the walls are quite flimsy before the water is added to hold them up. But with the extra help it becomes a much easier task. There is a lot of work to do before the walls can be installed, however, so you need at least a weekend to get to this point. Installing the walls only takes a couple of hours when the prep work is done correctly. Prepare the ground by digging out the sod and leveling the ground. Always dig down to level the ground — never try to fill up, or the weight of the water could collapse the ground. Check the level by placing a long 2 X 4 board across the ground and putting a level on top. Add about 2 inches of sand over the leveled ground up to where the walls will be installed. Rake it out and then level it out. Place a patio block at each point where there will be a post on the outside of the wall. The
