How Do You Open A Kenmore Washing Machine?
The best way to troubleshoot your Kenmore washer is to open the cabinet and fully access all of the components inside the washer. The washer cabinet will come away from the base in a single piece. When you disassemble the washer, the control console remains on the washer and the electrical components are fully accessible. By removing the cabinet, you will also have an opportunity to clean in areas that would not normally have access to on a daily basis. Unplug your Kenmore washing machine power cord from the wall outlet. Pull off the pieces of trim on each side of the control console. The trim snaps over each end of the console. Grab the trim from the upper rear and pull the trim forward to disconnect from the console. Find the screws on the bottom of each end of the control console that fasten the console to the top of the washer. Turn the screws counter-clockwise with a Phillips head screwdriver and remove them from the console. Tilt the front of the control console back toward the r
