How Do You Make Paving Stone Molds?
Paving stones can be used to create a quick patio, walkway or border. When buying these items in the store they can cost anywhere from about $1.00 each to over $4.00 each, depending on the size. Create a uniquely shaped paving stone by following these steps. Create a plywood paving stone mold. Trace the shape of the mold onto a piece of plywood. Then cut out side pieces that will be about an inch deeper than you want the paver to be. Assemble the mold by applying wood glue to each edge and then nailing the piece together to create an open box shape. Allow the glue to dry and then smear an epoxy along the interior edges of the mold. This will create a smooth edge for the pavers. Make an earth paving stone mold. To make this type of mold use a measuring tape, some spray paint, a shovel and a place to dig. Start by measuring out the sides of the paving stone mold on the ground. Use the spray paint to mark where to dig. Next use a flat faced shovel to dig out the mold following the painted
