Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How Do You Make An Outdoor Fireplace From A Clothes Washer Tub?

0
Posted

How Do You Make An Outdoor Fireplace From A Clothes Washer Tub?

0

Creating a outdoor fireplace from an old clothes washer tub is a cheap and innovative way to enjoy the warmth of a fireplace in the backyard or even camping. • Obtain an old non-working clothes washer. • Open lid of washer and remove the top of the agitator to expose the bolt holding the agitator in place. • Remove bolt and remove agitator from tub. • Remove metal collar in the center of the tub. This can be done by placing a pair of water-pump pliers into the groves of the metal collar and striking the pliers with a hammer in a counter-clockwise direction until the collar has been loosened. • Turn washer on its side to expose the bottom of the washer. • Disconnect the electrical harness from the motor. • Disconnect the pump hose and drain hose from the tub. • Remove the bolts holding the motor assembly to the tub. • Remove motor assembly from the washer. • Remove the entire top of the washer either by removing the screws that attach the top to the body or pry the top off. • Remove tub

0

• Obtain an old non-working clothes washer. • Open lid of washer and remove the top of the agitator to expose the bolt holding the agitator in place. • Remove bolt and remove agitator from tub. • Remove metal collar in the center of the tub. This can be done by placing a pair of water-pump pliers into the groves of the metal collar and striking the pliers with a hammer in a counter-clockwise direction until the collar has been loosened. • Turn washer on its side to expose the bottom of the washer. • Disconnect the electrical harness from the motor. • Disconnect the pump hose and drain hose from the tub. • Remove the bolts holding the motor assembly to the tub. • Remove motor assembly from the washer. • Remove the entire top of the washer either by removing the screws that attach the top to the body or pry the top off. • Remove tub assembly from washer. • Remove plastic collars from tub. • Remove metal tub from tub housing. • Discard remaining washer. • Drill four 1/2 inch holes into th

Related Questions

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.

Experts123