How Do You Make An Automatic Water Dispenser For Poultry?
Poultry need to have constant access to water. Most water dispensers sold to hobbyists are sized from 3 to 5 gallons—large enough for a small flock for a day or two but inadequate for larger flocks. Commercial systems are expensive, but can be used as a template to build your own system. You need to have a system that can be easily cleaned and is not easily spoilable, and it needs to provide ample reserves in case a problem occurs in the water line. Drill a 3/4-inch hole on the bottom of the drum. Fit the PVC coupling with the rubber in the hole and tighten it well. Put some water in the drum to check if the seal is water tight. When tight, empty the water and let it dry. Take the ¾-inch pipe and drill a hole to fit the poultry nipple on. Refer to the installation sheet to know how to drill the hole. Put one nipple every 8 to 10-inch. Once all the nipple are fitted, put water in the pipe to test for the seal of each nipple. Glue the pipe to the water container coupling. Glue the end
