How Do You Make An Angel Card Using Embossing And Paper Cutting?
• Choose the colours you want to use. This example shows use of bronze and white papers for the card. You can vary the colours as per your requirement. Take a more than 160 grams per square meter weight paper (250 gsm paper is used in this example), preferably A4 sheet but you can really use any size you want. Fold it into half and decide which side you want to use as the front of the card. • Make guidelines on the back side of the front cover. In this case, guidelines are made 2.5 cm from the edge, leaving enough room for the design to be accommodated. • Stick the embossing pattern with scotch tape along the guiding lines. Don’t use ordinary cello tape as it’s hard to remove. Scotch tape comes off easily. • Take an embossing needle (as you can see in the picture here) and start outlining the pattern on the front cover, much like moving a pen around on a stencil. • Here is how it will look. • Outline the inner pattern after you’re through with the outer pattern. • This is how it’ll loo
