How Do You Make A Wireless Network?
The technology is growing rapidly and wifi networks are fashionable. Why bother with cables that when we do everything wireless? Step 1 jQuery(document).ready(function(){ jQuery(‘#jsArticleStep1 span.image a:first’).attr(‘href’,’http://i.ehow.com/images/GlobalPhoto/Articles/4502076/wireless-network_Full.jpg’); }); The first thing to have, of course, is an Internet connection. Create a network to share this connection Step 2 jQuery(document).ready(function(){ jQuery(‘#jsArticleStep2 span.image a:first’).attr(‘href’,’http://i.ehow.com/images/GlobalPhoto/Articles/4502076/Linksys_Full.jpg’); }); Then there is a need to buy a wireless router. There are many good choices in the marketplace, especially d-link and above all linksis. Determine where he worked with your network, as is the building and so on. router to determine which is most appropriate. Calls helps sellers in the store. Step 3 jQuery(document).ready(function(){ jQuery(‘#jsArticleStep3 span.image a:first’).attr(‘href’,’http://i.
Yes it is!, if you have already set up a WEP or WPA/2 passkey for your router then you’ll just need to press start – control panel – network and internet – network and sharing centre. About half way down the page you should see some blue text that says “connect or disconnect”. Click that and then find your network in the list, enter your passkey if you need it and hoorah! You’re connected. If your network doesn’t appear on the list however, this could mean two things: 1)You’re laptop hasn’t got WiFi turned on 2)You haven’t set up your router for WiFi 1)Different laptops have different ways to turn their WiFi on and off, on my laptop I have hold Fn and then press F2 (dell inspirion 6400) and on my friends sony vaio there is a switch near the trackpad that turns it on and off, if you look in your mannual it will be in there. Another thing is that if you are on the “power saver” battery setting then windows 7 will turn of your WiFi by default to save energy, so right click the battery ico
1 Insert the installation CD (the one that came with the D-Link router) into the CD drive of the computer that will be located closest to the router. Follow the onscreen instructions to install the D-Link router software. 2 Plug the AC power adapter from the router to a wall outlet. Connect an Ethernet cable from the outgoing port on your cable or broadband modem to the port on the D-Link router labeled as “WAN” or “Wide Area Network.” Attach another Ethernet cable from one of the numbered ports on the router to the Ethernet port on the computer. 3 Open a web-browsing program and attempt to access a website to ensure that you set up the router correctly. Remove all of the cables and re-install the D-Link software if you are not able to surf the Web on the computer. 4 Connect Ethernet cables from any of the available numbered ports on the D-Link Router to the Ethernet ports on the other computers you want to network together. Turn on one of the computers and navigate through the “Start”
