How Do You Make A Vaporizer At Home?
Making a personal home vaporizer can reduce or totally eliminate the need for purchasing large, cumbersome vapor units and keeping them maintained. Simple soldering hardware can be reused and coupled with a small heated atomizer to produce clouds of vapor from small amounts of fluid. The average experimenter can build a personal vaporizer in about a half hour. Remove the batteries from the Cold Heat soldering iron by unscrewing the battery cover and letting the batteries slide out. Pull off the ceramic tip at the front of the device by lightly tugging on it with bare fingers. Do not use a tool to remove the tip, as it could become damaged. The black tip shown in the picture is what will come off in one piece. Inside the removed tip, bend the contact on the right (viewed as in the picture) down so that it is lower than the opposite contact. Solder the M401 atomizer’s positive internal contact to the right side terminal on the Cold Heat gun with a short piece of insulated wire. Ideally,
