How Do You Make A Table Saw Cabinet?
If you want to store your table saw safely, a cabinet is a great solution. Building a 4-foot cube-shaped cabinet with a door, providing plenty of room for the table saw, requires a few carpentry tools, plywood, and hardware and is an fairly easy project. Cut three 4-foot square pieces from a sheet of plywood for the top, bottom and back of the cabinet. Cut two 3-foot 10 1/2-inch by 4-foot rectangular side pieces using another sheet of plywood. Cut a door for the front of the cabinet from the third sheet of plywood. The door should be 3 foot 10 1/4 inches square. Brush wood stain or paint on all pieces if you think the cabinet won’t get too much wear and tear. Stand two 4-foot square pieces (the top and bottom) up vertically and position them parallel to each other 4 feet apart from the outer edges. Place the other 4-foot square piece (the back) vertically on one end of them so you have three sides of a box. Attach them with nails. Leave the completed section in this position. Place a 3
