How Do You Make A T-Shirt Cannon?
Many big events like football games or concerts give away free t-shirts to the crowd, but it can be difficult to toss prizes to the upper decks. Solve that dilemma by creating a t-shirt cannon. All that’s needed is a quick trip to the hardware store and the following instructions. Cut 2 pieces of 2-inch PVC pipe to approximately 3 feet in length. Sand the cut edges until smooth. Attach a 2-inch end cap to one end of one piece of pipe. Do not glue this on. Measure down about 1 inch below where the end cap stops. Remove the cap. Attach a drill bit that is about the size of a Schrader valve. Take a Schrader valve off an old bike if one can’t be found elsewhere. Drill through the PVC pipe where previously marked. Apply a fair amount of PVC primer to both the inside and outside of the newly-drilled hole. Add PVC cement to the inside of the hole on the PVC. Paint PVC cement on the base of the Schrader valve. Insert it through the PVC pipe hole from the inside going out and hold in place unti
