How Do You Make A Stun Gun Out Of A Disposable Camera?
It is entirely possible to take something as innocuous as a disposable camera and make it into a stun gun. There is enough battery power to shock someone with the desired effect or, shock yourself if you are not careful in the creation of it. Keep in mind, this is a weapon you are creating and should be used with responsibility and good judgment. Step 1 Unwrap the camera’s cardboard enclosure. Take the camera and discharge the flash by setting the flash on and snapping a picture. Be sure the flash goes off to prevent shocking yourself in the next steps. Step 2 Use the flat-head screwdriver to pry open the back of the camera, exposing the film, battery and internal mechanisms. Step 3 Take the stereo wire and split the wire back. Strip approximately 1/2″ off of each side with the wire cutters, then twist the wire make sure all frayed ends are together. Step 4 Remove the circuit board. Short out the capacitors by using the screwdriver against the battery charge. If no spark flies, the bat
