How Do You Make A Stepping Stone Pathway With A Mold?
Stepping stone walk or patio area is easy to do, by following these easy instructions. Gather all the materials together. A bag of cement will weigh about 60 to 80 lbs so be sure to have some help with the lifting. It will take about 1 and a half bags to make 2 stones depending on mold size. Leveling out a grassy area is not to hard just remove the grass down to the soil, level the ground nicely and place your step mold in that area. You can always add more grass later or fill in with added cement or sand between the step spaces. Draw out your plan on paper. Sometimes working from scratch ends up a little “Iffy”. Nice thing is the stones when set are so easy to remove. NOW YOU ARE READY TO MIX!!! Don’t breathe in the dust of the cement when pouring it into the pan. If you want colored steps then use liquid cement colorant to water before mixing. Instructions on bottle. Mix to a good mud pie mix, stirring very well with a large trowel or shovel if doing a lot. The bags tell you how to g
