How Do You Make A Simple PVC Tap Water Filter?
If you are using fresh tap water as the source to make-up aquarium saltwater or top-off your system with, here are easy to follow instructions for making a simple PVC constructed tap water filter that can achieve about the same purification results as with a more costly commerical TWP (Tap Water Purifier).Difficulty: EasyTime Required: 30 minutes or lessHere’s How: • Cut a desired length of 2 and 1/2 inch diameter PVC pipe. • Drill a hole in the center of the end cap, of a suitable size to match the vinyl hose diameter for insertion or attachment. • Attach the end cap to one end of the PVC pipe. • Attach a desired length of the vinyl hose to the drilled hole in the end cap. • Roll up a piece of Poly-Bio-Marine Inc.’s PolyFilter material and place it inside the PVC pipe and add activated carbon. • Simply pour or run tap water down through the open end of the PVC filter and direct the treated water that comes out of the vinyl hose into your saltwater aquarium or storage a container.Tips:
