How Do You Make A Rabbit Cage?
Rabbit cages can get pretty expensive, especially when you want to give your rabbit plenty of room to run around when you’re not there to let him out. A cheaper, more efficient way of getting a cage is to make one yourself. Here’s how to make your own rabbit cage. • Gather the supplies needed. You can probably find most of them at Home Depot. • Saw the big board into three 2 x 3′ pieces. Nail them together to make two walls and a floor. Drill holes for ventilation. Make sure you put the walls on top of the floor, not on the sides, or else the ceiling won’t fit. • Put on the gas mask. Drill holes along the edges of the two long sides of the big sheet of plastic and along three sides of the small sheet. Attach the big sheet as the ceiling and the small one as the back wall. You can even attach the small one a little high for ventilation and/or cleaning the cage. • Use a drill or chisel (preferably the drill for this task) to make a 1/4″ x 2 x 2’slot in the opening opposite the small shee
If you are looking for a new home for your pet rabbit, somewhere where to keep his food and let him sleep, then you can make your own rabbit cage. In the stores, rabbit cages can be quite expensive and sometimes too small. If you want to give your new rabbit some space to move around when you’re not home, it would be better to build a cage yourself. Step 1 Decide how big a cage your bunny needs to it can freely move around, sleep and play. Look at the list of things so you can estimate or measure how much wood, wire and other roofing materials you need for the cage. Step 2 Cut the plywood into three separate pieces. Use one as the floor, and the other two pieces as the two walls. The two wall pieces should be the same size. Nail them together at the bases with hammer and nails. Step 3 Get your cage wire material and apply it to both of the other sides of the box. Twist the wires around the base of the plywood and make sure there is not any pieces sticking up that might injure your rabb
