How Do You Make A PVC Ribbon Holder?
Organizing and storing ribbon is often difficult. A PVC pipe ribbon holder is one way to keep ribbon together and easily dispensed. This PVC pipe project is convenient and only takes about one hour to complete. Organize your craft room or just the ribbon drawer with this inexpensive ribbon holder. Step 1 Connect two 3-inch PVC pipes together with the straight holes in a 3-way connector. Glue the connector and pipes together with the PVC cement to hold them in place. Repeat this with the other two 3-inch pipes and 3-way connectors. Step 2 Turn the pipes flat on the table so the empty holes in the 3-way connectors are sideways and facing each other. Slide one 6-inch PVC pipe into each of the open connectors. Apply PVC cement around the connectors. This needs to look like an “H” with a hole in the middle. Step 3 Connect the two 6-inch pipes together with a 3-way connector. Make sure the open end of the 3-way connector faces up. Add cement to the pipes to secure them together. This complet
