How Do You Make A Marshmallow Gun?
Marshmallow guns are fun, while remaining accurate but non-lethal. The basic idea is that you blow into a series of PVC tubes to push out a marshmallow. Great for parties and having fun with your friends. • measure Use a ruler to mark off six 5-inch sections of pipe with a black marker. Then mark off one 8-inch section of pipe and cut the pipe at that mark, leaving you with one 38-inch piece. It’s just easier to work with a shorter pipe. • cut Cut at the other marks you made to produce the required six 5-inch pieces and one 8-inch piece. • Get the two elbow-bend connectors, two T-shaped connectors, and two end caps. • Take the 8-inch piece and insert it into one of the two horizontal ends of one T-shaped connector. • Put one 5-inch piece in the other horizontal end of the same T-shaped connector. • Insert another 5-inch piece into the third opening of the connector. Put a cap on the other end of this piece; this is one of the handles of your gun. • Go back to the first short piece you
This marshmallow gun is simple to make and will have you laughing for hours at its incredible accuracy and range. You can put this gun together in no time, play around, and take it apart again to experiment with longer or shorter pieces. The possibilities of fun in this homemade toy are endless, so let’s get started. Step 1 Assemble the mouthpiece by connecting the 9-inch pipe to an elbow. Connect the elbow to a 5-inch section of PVC, connecting that to a tee. Step 2 Make the hopper by attaching a cap to the 8-inch pipe. Attach a tee to the other end, and finish by attaching a 5 inch section of PVC to the tee. Step 3 Construct the handle by attaching 2 5-inch pieces of PVC to an elbow, placing a cap on one piece. The piece without a cap should be stuffed with cotton balls. The capped piece will remain empty to fill with extra ammo, i.e., marshmallows. Step 4 Combine all the parts together, attaching the 11-inch PVC section to make the gun barrel. Step 5 Use the gun by first loading the
