How Do You Make A Cat Scratching Post?
Can’t find just the right scratching post for Kitty? Build her own out of scrap materials. • Decide on the measurements of the post before beginning. The post must be stable, for if it tips easily, Kitty may find it to be unsuitable for continued use. The model in the picture measures 28″ tall, and the base is about 18″ by 12″. The post needs to be, at minimum, the length of Kitty plus a couple of inches for her stretch. • Use a 4×4 post or 2-2×4 pieces attached together, and cut to the length needed. Set this aside for a moment. • The base on this model has two layers. The first layer is made by setting 3-12″ sections of 2×6 side by side. Cut 2 sections of 2×6 to match the width of the first layer (16.5″ as 2×6 are in truth 1.5″ by 5.5″). Place these 2 sections of the second layer on top of and parallel to the first layer. Attach the top layer to the bottom with wood screws. This makes for a heavy and stable base. • Cover the base with your scratch material, something along the lines
