How Do You Make A Boom Box Car Stereo?
There are many parts of a car that can be modified and improved. Some people alter the exhaust system, while other people focus on custom paint jobs or aftermarket seats. However, almost all serious car enthusiasts add some sort of car boom box to increase the sound quality. Most of the stock car speakers don’t sound as good as they could. You don’t need to spend a lot of money on a boom box car stereo. You can make your own. Step 1 Make the boom box top, bottom, front and back. Take the MDF and measure four pieces at 7 by 17 inches. Cut the pieces using a saw. Use sandpaper to remove any rough material from the sides of these new pieces. Step 2 Cut two pieces of MDF for the sides of the boom box. Each piece should be 7½ by 7 inches. Use a pen and ruler to mark the area where you’re going to cut. Take a saw and cut out these two pieces. Use sandpaper to remove any rough material from the sides of these pieces. Step 3 Make holes for the speakers. Lay both of your speakers on one of the
