How do you make a balloon car?
This will show you how to make your very own Balloon Powered Toy Car. • Get a carton and cut off the top. • Cut it in half the long way. • Cut a small hole in the middle of one of the short sides of the carton. This is where the balloon goes. You’ll probably have to mess around with the size of the hole. If it’s too big or too small, there won’t be enough force to move the car. • Put the balloon through this hole, but don’t blow it up yet. • Make holes on each side of the carton for the axles and stick straws though these holes. Make sure they’re close to the bottom. • Attach the spools to the straws and put pins through the straws to keep the spools on. Blow up the balloon – don’t tie the end – and let your car go!
When teaching kids about science, it is important to make the lessons fun. Kids respond to science concepts that they can visualize. With these easy steps, you will create an experiment that will interest your kids and make science enjoyable. Learn how to make a car powered only by a balloon’s air. Step 1 Wash the inside of an empty milk carton; this will be the body of the balloon car. Use the scissors to remove the top of the carton and to cut it lengthwise down the middle. Step 2 Find the center of the one short side and make a hole with the scissors. The opening should only be large enough to fit the nozzle of the balloon. Step 3 Place the uninflated balloon in the carton and stick the end of the balloon through the hole. Step 4 Position the carton lengthwise and cut two holes on the bottom for the front and back axles. Turn the carton and cut two more holes on the opposite side. Make sure they line up with the existing holes. Place one straw through the two front axle holes and th
