How Do You Lay A Flagstone Walkway Using The Dry Method?
Basically there are two ways that you can lay a flagstone walkway. You can use the wet construction method meaning you will set the stone in concrete or mortar or you can use the dry construction method meaning you will lay the stones on a sand base. In this example, I will show you how to lay a dry construction stone walkway in sand. Begin by scoping out the project. Decide where you want your walkway in proportion to the rest of your yard area. Some good ideas are to put a path directly to your garden or detached shop building. Use spray paint to mark the desired pathway. You may also use string or a garden hose. Spray paint works best. A curved design will add more interest than a straight path. Working within the boundaries of your drawn path, use the flat edge shovel to remove the top layer of sod. This is a difficult process. Edge the shovel far enough under the sod to get the bulk of the roots then press the shovel forward. A tiller can also be used for this step, but then the g
