How Do You Install Wire Closet Shelving, Closet Organizers?
Wouldn’t it be nice to organize your closet. Those organizers sure look neat. I will never be able to put them in myself. Gie it a try it is easier then you would think. Put the closet pole together. These pieces either slide together or there is a splicer that both pieces slide into. Put the end caps on the closet pole. Mark the back wall at heights you desire for your shelves. Use the numbers in directions as guides for these figures. Use a level and draw level lines across back wall and 1 foot out on each side wall. Cut your shelving to the desired lengths. Remember you have one closet pole in these kits if you are using a kit so sheles have to end at same place unless they are full length. Put end caps on all bare ends. Hold shelving along line where it is going. Mark wall about every 8 to 12 inches where there is not a cross wire. Do this to all shelves. At twelve inches from back wall where shelves hit end wall mark holes for wall holder brackets. Drill 1/4 inch holes on all mark
