How Do You Install Snoblox Snojax Icejax Snow Guards?
• Clean the roof surface with Xylene (Xylol) or isopropyl alcohol where the guards are to be attached. Do not allow the cleaner to come in contact with the guard. Note: SnoJax I should not be glue mounted. • Cut the tip of the Surebond SB-190 adhesive nozzle in a broad fashion (see insert) and smear the adhesive evenly across the entire base of the guard. The SnoJax II and IceJax have special interchangeable bases to straddle a minor rib. If there are no minor ribs the flat surface should always be down. Ensure that when the guard is set in place, the adhesive will uniformly cover the complete underside of the base and provide an adequate squeeze-out around the entire perimeter. If straddling a minor rib, the gap must be filled with adhesive before guard placement. Remember to allow for 28 days at 50° Fahrenheit or above to obtain a full cure. Place the guard perpendicular to roof slope with flat front facing toward the ridge and press downward evenly to ensure complete adhesion. Check
