How Do You Install PS2 Solderless Mod Chips?
You can modify your PS2’s functions by installing a “mod” chip onto its motherboard. A solderless mod chip, purchased from a PS2 mod supply store, will eliminate the need for any soldering. The procedure is really no more difficult than plugging in an electric cord to a wall socket, although opening the PS2 will void your Sony warranty. Put a beach towel on a table. Remove all of the cables from the PS2. Put the PS2 face down on the beach towel. Scratch off the warranty stickers from the bottom of the PS2 with the tip of the utility knife. Pull off the four rubber feet from the bottom of the PS2 with the tip of the utility knife. Remove the screws now exposed on the bottom of the PS2 with the Torx screwdriver. Turn the PS2 face up on the beach towel. Lift the sides of the outer case of the PS2 off with your hands. Put the outer case aside. Locate the metal grill heat shield at the upper right side. Release the catch on each side of the metal grill heat shield with the tip of the utilit
