How Do You Install Crown Molding And Tips On Cuts And Angles?
Installing crown molding in your home can instantly add value to it. Although the installation of crown molding can be a difficult job, the rewards are well worth it. Cutting the crown molding can be a tricky endeavor, so be sure to get extra planks of molding in case you make an error. Using a compound miter jig saw will help the job of cutting the crown molding go much faster. Begin your work at one corner of the room where you want to install your crown molding. Measure the room carefully and ensure that you have enough planks of crown molding to go all the way around the room. Cut the end of your first piece of crown molding at a 45-degree angle using a compound miter jig saw. Put the cut end of the crown molding into the corner of the room. Determine if you will need to splice two pieces of crown molding together; if your wall is longer than a single plank of crown molding, you will need to make a splice. Splice together two pieces of crown molding by cutting the ends of both piec
