How Do You Install An Interior Door Slab?
When installing a new door into an existing frame, it is often difficult to find a door with the right measurements to fit the frame. While doors can be cut down to fit, they often have pre-drilled lock and hinge preps that will not align with those on the frame. To remedy this problem, many installers will use a door slab for this type of application. A slab does not have any hardware preparations, and can be easily cut to any size depending on the layout and configuration of the frame. Remove the existing door from the hinges. Line a center punch up with the hinge pin, then use a hammer to drive the pins out. Once all the pins are out, remove the door from the opening and set it aside for disposal. If the door is in good condition, consider donating it to a local construction salvage facility. Measure the existing door, including the thickness. Choose a new door slab that’s roughly the same size as your existing unit. It should be exactly the same thickness, but can be slightly large
