How Do You Install A Zebra 2844 Network Printer?
The Zebra 2844 network printer is a device used for printing labels via a thermal transfer process. The Zebra 2844 is capable of generating monochrome labels at a rate of four inches per second, and may be connected to your computer via a USB, parallel or serial cable. If desired, you may also integrate your Zebra 2844 into your home network for added convenience. The procedure for installing a Zebra 2844 network printer is a simple one, easily accomplished in a matter of minutes. Connect the power cord to the power supply unit. Plug the power cord into an available electrical outlet. Plug the power supply unit into the printer (the connector is located on the back of the printer, near the bottom left edge). Locate the cover release latches on both sides of the printer, near the front end. Pull the latches toward you and open the printer cover. Prepare your media roll by removing the uppermost layer. Locate the media hangers inside the printer. Separate the media hangers and insert you
