How Do You Install A Water Saddle Valve Self Tapping?
A saddle valve is a self-tapping valve used to access water from a main water line to feed a low-water supply line for appliances such as ice makers and installed humidifiers. This plumbing project does not require specialized tools and is very easy to do yourself. Saddle valves are self-tapping for copper water lines, but not for water lines made from other materials. Select a cold water supply line as close to the appliance as possible. Turn off the water from the main water supply valve. If there are other valves leading to the area, close at least one of them. Open any faucets located on the selected supply line to relieve pressure in the pipe. Turn off the faucet when there is no longer any air or water escaping from the spigot. Clean the exterior of the supply line at the selected location. Wash plastic or stainless steel with water. Clean copper lines with fine steel wool. Turn the top handle on the saddle valve until the tip of the lancing pin, located in the center below the v
