How Do You Install A Water Pump In A Pontiac Grand Am?
While it can be somewhat challenging to get to hidden parts, such as the water pump, in a Pontiac Grand Am, replacing the damaged part yourself can save money. With a little patience and the right directions, you can perform this task with relative ease. Use a screwdriver to loosen the screw that connects the negative battery cable to the battery post. Pull the cable away from the post. Use a jack to lift the car. Support the Pontiac Grand Am with jack stands and the engine using a lift or some other engine support device. Empty the Pontiac Grand Am’s cooling system by opening the cap on top of the radiator and unplugging the drain plug underneath the radiator. Position a large container under the drain hole to catch the draining coolant. Use an adjustable wrench to disconnect each part in front of the water pump. Lay them out in the order removed. In order, these parts include the automatic trans axle (if equipped) and the front wheel on the ridehand side, and then the splash shield,
