How Do You Install A Water Pump In A Jeep Grand Cherokee?
The Jeep Grand Cherokee often has a heavy workload, which wears on the water pump. A bad water pump will first leak from the seals or produce loud noise from the failing bearings. Installing a water pump in a Jeep Grand Cherokee is a project that almost anyone can complete with the right tools and instructions. Use cinder blocks to secure the truck, if parked on an incline. Jack up the Jeep Grand Cherokee, using jack stands to stabilize the vehicle. Disconnect the negative battery cable by opening the hood and using a screwdriver to unscrew the clamp that connects the negative battery cable to the battery post. Twist the radiator cap open slowly. After the pressure is released, remove the drain plug located underneath the radiator with an adjustable wrench. Put a container under the opening to catch the coolant instead of letting it drain on the ground and seal the container for disposal. Wipe up any spilled coolant to avoid slippage. Take off the parts leading to the water pump on the
