How Do You Install A Turbo Kit On A Car?
Installing a turbo kit on your vehicle is the quickest way to make a substantial horsepower and torque gain. However, installing a turbo kit on your vehicle is also one of the quickest ways to cause irreversible engine damage if you are not careful about certain aspects of turbocharging a vehicle, such as proper tuning and boost control. Remove the turbo kit from its packaging, and lay out the parts on the floor. Make sure all the components are there. Jack up the vehicle and place it on jack stands. Disconnect the exhaust from the exhaust manifold. There will typically be two or three bolts holding the exhaust to the manifold. Loosen the bolts that connect the exhaust manifold to the engine block and remove the manifold. Install the turbo onto the new manifold using the hardware supplied with the kit. Be sure to install a gasket between the turbo and the manifold. Connect the exhaust manifold and turbo assembly onto the engine with the hardware supplied. Torque the nuts to the torque
