How Do You Install A Starter Push Button Switch?
Push button switches can be used used to activate the starter in cars, trucks, and tractors. When an ignition switch has a defective start position a push button can be used instead of replacing the defective switch. This might be done if the car is so old a replacement for the ignition switch was either unavailable or prohibitively expensive, for example. Where the security of a key lock isn’t important, such as a race car or a tractor, push button switches are used to control the starter and a simple toggle switch handles turning the ignition on and off. Disconnect the vehicle battery negative cable from the battery. Determine the best location for the push button switch. It should be in an area of the dashboard which can be easily reached by the driver. Use an electric drill and a drill bit of sufficient size to drill a hole large enough to mount the switch. Check your switch for the size as it can vary from one brand to another. Locate the starter solenoid. It will be found under t
