How Do You Install A Reverse Osmosis Water System?
• Purchase the reverse osmosis system. You will also need a 1/2″ drill bit for mounting the faucet and a smaller drill bit for installing the waste water line. Teflon tape for sealing the connections. • Read the installation instructions all the way through at least once so that you are familiar with the procedure and confirm that you have all items needed before you begin. • Gather together everything you will need for the install and have these items close to where you will be working, usually under the kitchen sink. It is not a bad idea to go over the instructions again before you begin. • Remove the R/O system from the packaging and check for any missing parts. Assemble the filters in the proper order. Most systems will come with the filters already assembled into a bank of filters. The only filter not already installed will be the actual reverse osmosis membrane. This filter will be in a sealed package and should not be opened until you are ready to install the system. • Remove al
