How Do You Install A Power Commander On CBR1000RR?
Since 1972, Dynojet Research has provided aftermarket kits to enhance the performance of older carburetor-fed motorcycles. Most newer motorcycles, such as Honda’s CBR1000RR, use an electronically-controlled fuel-injection system. To enhance the performance of these electronic super bikes, motorcyclists employ the Dynojet company’s Power Commander, an electronic fuel-injection controller that can fine-tune the fuel-injection system to provide an additional boost in power. Installing the Power Commander is a relatively easy task, but it does require some technical aptitude. Remove the seat by unscrewing the mounting bolts under the seat with a 5mm Allen socket. Once the bolts are removed, pull the seat upward and to the rear of the motorcycle to release the seat front the catch tab on the front of the seat. Remove the gas cap and outer fuel tank cover. The cover is secured by two bolts at the base of the seat and two under the trim at the front of the tank cover. Remove the rear passenge
