How Do You Install A New Steering Rack In A Mazda6?
Mazda introduced the mid-sized Mazda6 in 2002 as the first model to attempt at more stylish automotive design. First generation models used a power steering gear instead of a rack and pinion system. Each engine model, 2.3 Liter and 3.0 Liter, used a slightly different rack. The instructions below cover first generation models with 2.3 Liter engines. A new generation was introduced in 2008. Disconnect the battery cables and remove the anti-lock brake speed sensor. Lift the front end for easier access and pull the front wheels, the under cover and the splash shield. Uncouple the stabilizer bar link from the shock absorber and separate the rear ball joints and lower arm front from the steering knuckle. Unfasten the bolt to the lower side shock absorber. Mark the location of where the steering gear and intermediate shaft meet and remove the pinion shaft bolt. Push the tie rod from the steering knuckle arm. Remove the heat shield bolts and unhook the steering lines from the gear. Remove the