How Do You Install A Car Alarm In A VW Beetle?
Installing an alarm in a VW Beetle requires considerable knowledge of car electrical systems, especially on the classic Beetles of the past. Older VW Beetles have likely had multiple electronic add-ons installed over the years or even complete rewiring of the car itself. Make sure you have a wiring diagram no matter which model Beetle the alarm is going in. Read the alarm manual carefully and ensure you fully understand the wiring diagram. Open the hood on a newer Beetle or lift the backseat on an older model. Remove the positive battery cable from the terminal and connect the alarm power wire. Mount the alarm siren under the hood, facing the engine in a later model Beetle. Run the wires through the firewall and pull them into the cabin, under the dash. Run a classic Beetle’s power wire under the carpet of the passenger seat and into the dash. Secure the shock sensor as instructed in the alarm manual. If the vehicle has power locks, locate the lock relay and attach the alarm lock modul
