How Do You Install A Car Alarm In A Subaru Out?
Installing an alarm system on the Subaru Outback requires considerable wiring skills and a clear understanding of car electronic systems. Popular options to include during this project are remote start and power window activation for complex systems. Installing a basic alarm in the Subaru Outback takes about two hours. Read the alarm manual carefully and keep the technical support number for the alarm handy in the event you have questions. Open the hood and disconnect the positive battery cable. Connect the alarm power wire to the positive battery cable and run it along the firewall to the driver’s side. Mount the siren in an open area in the engine bay, facing the engine to limit water contact while driving. Slide the driver’s seat all the way back and remove the screws holding the bottom of the steering wheel case in place. Identify the starter wire and attach the start disable relay. Connect the power lock module to the lock relay next to the fuse box. Drill a small hole in the dash
