How Do You Flush Out The Antifreeze On A Mazda MX-6?
The cooling and heating system in a Mazda MX-6 is comprised of the radiator, water pump, heater core and water passages located within the engine block. Over time, antifreeze can leave sludge inside these components. Excessive sludge can cause rust inside the thin metal tubes in the radiator and heater core, and can cause the seals in the water pump to leak. Flushing the cooling system is a straightforward procedure that can be accomplished by the vehicle owner, and can save costly repairs in the future. Raise the vehicle using an automotive jack and support with jack stands placed underneath the front subframe. Locate the petcock valve on the lower right corner of the radiator. Place a waste oil collection pan underneath it. Open the radiator cap, by pressing down on it with your hand and turning it counterclockwise. Open the petcock valve by turning it counterclockwise with needle nose pliers. Allow the cooling system to drain completely. Drain the engine coolant into an appropriatel
