How Do You Fix A Toyota Corolla Fuel Pump?
Like many vehicles, the Toyota Corolla’s fuel pump is contained within a module that is stored in the fuel tank itself. Unlike many larger vehicles, you won’t have to remove the fuel tank itself if you need to replace the pump. The fuel pump module is accessible from inside the car itself underneath the rear seats. Use extreme caution when working on any part of the fuel system because of its high pressure. Accessing the Pump Module Step 1 Remove the car’s rear seat cushion by lifting it up to release the clip on each side and pulling it out. Step 2 Unplug the fuel pump’s electrical connector to depressurize the fuel system, then open the gas cap on the outside. Crank the engine for three to four seconds and look for it to stall. Step 3 Disconnect the car’s negative battery cable. Removing the Pump Module Step 1 Take off the fuel pump’s access cover–it’s either secured by butyl tape and needs prying off or has four screws you must remove. Step 2 Unplug any more electrical connectors o
