How Do You Fix A Rusty Bicycle Chain?
Riding a bike with a rusty bicycle chain is like riding uphill – nonstop! If your bicycle chain is rusted, or you notice that your chain is beginning to rust, follow the steps below to ensure that riding your bike is as enjoyable as it should be. Step 1 Use a lightweight oil (such as WD-40) and coat the whole rusty chain while it is still attached to the bike. Rotate the pedals around for a few seconds to ensure that oil gets on the entire chain. Step 2 Wait…Let the oil soak in for several minutes. Step 3 Using an OLD rag, wrap the rag around the chain and wipe off all of the oil, old dirt, and rust. Be sure to rotate the pedals while doing this, but be careful not to get your finger caught up in the sprocket (what the chain goes around). Step 4 Inspect your chain to make sure that all of the links move smoothly. If there is a stubborn link, you can take a wire brush and scrub that area until the rust breaks free. Step 5 After the chain is completely cleaned apply another coat of oil
Does your bicycle squeak like violins on the first day at music camp? Do dogs cover their ears when you ride by? It’s probably just a rusty chain. This is an easy fix that every bicycle owner should know. Step 1 Apply lightweight oil such as WD-40 to the whole length of the chain. Rotate the pedals several times to ensure that the entire chain is oiled. Step 2 Wait several minutes for the oil to soak in. Step 3 Wrap a rag around the chain and vigorously wipe the oil, dirt and rust from the chain. Again, rotate the pedals several times. Step 4 Inspect the chain for links that don’t flex freely. If you find one, oil it heavily and scrub off any visible rust with an old toothbrush. Step 5 Oil the entire chain a final time.
