How Do You Fix A Jammed Garbage Disposal?
Turn the garbage disposal on and off quickly and check to see if it has power. If it hums, the power is on but the impeller is jammed. Move on to step 3. If it doesn’t hum, it may have overheated and tripped a circuit breaker. Move on to step 2. Restore power to the machine. Most disposals have an overload switch that trips when the motor starts to overheat. To reset the switch, look for a small red button on the bottom of the housing, and if it’s there, push it in (see A). If your disposal doesn’t have an overload switch or the machine still won’t run after you reset the switch, reset the circuit breaker that serves the disposal. Clear the jam from underneath. On many disposals, you can insert a 1/4-inch (6-mm) Allen (hex) wrench into the bottom of the housing and manually move the motor shaft and flywheel to dislodge the jam. If your disposal has an opening for an Allen (hex) wrench, insert the wrench and move it back and forth until the motor and flywheel turn freely. Clear the jam
