How Do You Fill The Oil Reservoir In A Sears Craftsman 3 1/2 Ton Floor Jack?
Craftsman professional floor jacks are extremely efficient devices that will lift and hold up to 4 tons in a safe and secure manner. But a monthly check of the oil level in the master reservoir is a must. Failure to maintain factory specifications with regard to the oil level will cause premature failure of the jack or poor performance. Fortunately, proper checking and filling of the oil reservoir is a simple task. Place the jack on a flat, level surface. Lower the jack so that it is in the full down position. Remove the magnetic tool tray located between the two rear wheels on the top of the jack. Set the magnetic tool tray aside. Remove the oil-filler plug using an Allen wrench. Wipe away all dirt, grease and debris from the oil-filler plug and set it aside. Wipe away all dirt, grease and debris from around the oil-filler hole with a clean rag. Inspect the oil level inside the oil-filler hole. The hydraulic jack oil should be visible 3/16 inch above the inner cylinder wall. If the oi
