How Do You Disassemble A Wireless Xbox 360 Controller For Painting?
• Remove the Battery Case Remove the Battery Case – Turn the controller over and remove the battery pack. • Remove Serial Number Sticker Remove the Serial Number – Utilizing a craft knife, carefully remove the top left corner of the serial number sticker. Then place the knife under the sticker and, pressing against the SIDE of the blade with your thumb, remove the sticker. • Remove The Screws Remove the Back Screws – Locate the seven screws on the back of the controller. Remove all of the outer screws first. After the first six screws are removed, finally remove the middle screw below the serial number sticker. • Remove the Back of the Controller Remove the Back of the Controller – While grasping the top and bottom of the controller with one hand, gently remove the back of the controller by pulling up on the bottom area first, then remove back past trigger area. • Remove the Bottom Plate Remove the Bottom Plate – Without completely removing the circuit board, remove the bottom plate. T
