How Do You Convert Auto To Manual Transmission?
Converting a manual transmission to an automatic is much simpler than converting an automatic to manual. This is a project that requires many parts and a strong mechanical aptitude. The brake pedal for the automatic will need to be replaced with a complete manual brake and clutch installation. On a rear-drive vehicle, the drive shaft may also need to be replaced. A separate bell housing, clutch mechanism and hydraulic or manual clutch mechanism will be needed and, finally, a shifter and linkage. Remove the existing gear shift linkage, if it is a column shift, or the shifter, if it is floor-mounted. If it is a column mount, use a small hammer and tap out the roll pin holding the gear shift lever. Remove the shift cable from the lever at the base of the column and pull it through the firewall. If it is a floor shift, it will be necessary to remove the center console and take the shifter loose from the floor. Simply unscrew the bolts holding the console and the floor shifter to the floor.
