How Do You Consolize An Arcade Game?
Do you remember those old classic arcade games and wish to play them again? If you can get your hands on some old arcade motherboards, you can consolize them onto your TV set and have your own mini-arcade. That is, if you’re well experienced in electrical engineering. Examine the JAMMA pinout and find the +12, +5 and -5 connections. These should be printed on the pinout. Connect the +12, +5, -5 and GROUND wires from the power supply to the JAMMA harness. Generally, you should use black wires for ground (GND), red for +5v, yellow for +12v and white for -5v. Wire a toggle or slide switch between pin 14 and any GND on the power supply. You will use this to turn the power on and off. Connect the red Comp spot to the center terminal of an RCA phone jack and the outer shield of the jack to ground, if you want composite video out. Connect the red “C” and “Y” spots to a loose S-video jack. Connect +5 volts and ground to the JAMMA connector. Connect pieces of hard drive ribbon cable to each of
