How Do You Clean The Drain Filter On A High-Efficiency Washing Machine?
High-efficiency washing machines use less water than traditional washing machines, but may come with different problems. An error message of Sd (or 5d) on the screen of a Kenmore washing machine indicates a problem with too many suds. This is either a case of using the wrong detergent (standard detergent creates too many suds for a high-efficiency washing machine) or a plugged drain. If you determine that the detergent isn’t the problem, and the drain line is not kinked, the next step is to check the drain filter. Lift the washing machine and place a block of wood or other sturdy item under it to hold the front off the ground. The machine should be at least 4 to 6 inches off the floor. Do not pinch lines in the back. Remove the three screws on the bottom of the lower panel of the washing machine, using the 1/4-inch socket or hex screwdriver. Remove the metal panel covering the bottom of the front of the machine. Locate the drain filter cover. It is usually a white plastic cylinder with
