How Do You Clean A Fish Tank Using The “No Spill Clean And Fill” 25 Ft?
Anyone who has ever owned a fish tank knows just how stressful it can be when water changes and gravel siphoning must be done. The python “No Spill Clean and Fill” system can cut that stress in half! It is easy to use and nearly mess free. 1. Remove the faucet head and washer 2. In place of the faucet head attach the faucet pump. Screw it on but not to tight. 3. Then connect the female connector end of the hose to side of the faucet pump. 4. Connect the clear gravel tube to the male connector end. 5. Close the open/close switch next to the male connector. 6. Go back to the faucet and pull down and open the bottom of the faucet pump. 7. Turn on the faucet to a medium flow of water. 8. Go back to the fish tank and put the gravel tube in the tank. 9. Open the open/close switch and suction will be created. Now siphon the gravel until the water being suctioned out is clear. 10. Once that is done close the open/close switch and remove gravel tube. Hold it in the air until you reach the sink.
