How do you change the oil in a 1997 chevy blazer?
Warm your vehicle up a few minutes as warm oil flows out better than cold. Get on your garage clothing, grab a pair of rubber gloves to keep the mess off your hands. Place a bucket or something large enough to hold about 5 quarts of old oil under your drain plug which you should be able to see from under the vehicle. Loosen the drain plug with a wrench then by hand as it is almost ready to come off. Watch out, the oil will flow toward the back of the vehicle. Let it drain until it stops dripping, 15 minutes or so. Then loosen the plastic cover plate and remove the oil filter, again place a bucket to catch the oil and let the filter drop in that. Remove the oil fill cap to let the oil out. Replace the oil drain plug and tighten. Then the same with the new oil filter. Put in about 5 quarts of oil, look under vehicle to check for leaks. Start the engine and let it run a few minutes, then check again for leaks. If all is well enjoy the ride and you can rest knowing you did it right. I just
