How Do You Change The Housing Of A Motorola Razr?
If you you don’t mind going without your cell phone for a few hours, switch the housing on your Razr for a nice change of pace and a more personalized phone. Give your phone a new look with a little bit of work. Change the Housing on the Bottom of the Phone Step 1 Remove the battery cover from your Razr by pushing the cover latch down and pulling off the battery cover. Remove the battery and unscrew the two screws holding the motherboard housing to the phone. Step 2 Slide the edge of a credit card under the housing from the screw holes all the way around the edge of the housing until it pops off. Lift the housing up carefully so you don’t damage the motherboard, which is still connected to the keypad. Pay attention to how it’s oriented in the housing. Step 3 Use tweezers to pull the connector to the motherboard off the housing. Use one of the screwdrivers to pry the tab holding the antenna and speaker cover. Leave the screwdriver under the tab and slide another one underneath the anten
