How do you change the drivers side front turn signal lamp on a 2001 Ford Escape 4WD?
Once you remove all of these screws, and move the bumper out of the way, you will be able to see the headlight assembly. There are 2 screws that hold the top of the assembly in place, one screw that holds the bottom front of the assembly in place (blocked by the bumper) and another screw that holds the far right side of the assembly in place (blocked by the bumper, almost at the wheel well) At the top, there are 2 points where the assembly snaps onto the frame, pry them up. There is 1 place, near the wheel well that is also snapped into place. Remove these screws and the headlight assembly will come out. Change the light, the mount twists out of the assembly. Re-assembly is the reverse of removal. Make sure everything is snug so the screws don’t back out.
