How Do You Change Mustang IIs Front Brake Hose?
Over time, the rubber in the front brake hose on your Mustang II will begin to deteriorate and crack. The hose may also split, causing a severe leak and brake-system failure. Faulty brake hoses can also cause premature wear of the brake pads and overheating of the brake rotors. Replacement of the front brake hoses in your Mustang can be accomplished in an afternoon and will restore the function of the brake system. A few special tools may be needed, but they are available at your local auto-parts store. 1. Step 1 Raise and support the front of the Mustang by placing the floor jack under the front sub-frame and lifting the car until the wheels are off the ground and placing jack stands under the sub-frame. Lower the jack until the car is supported by the jack stands. Remove the front wheels and store them to prevent tripping and loss of the lug nuts. 2. Step 2 Disconnect the rubber brake hose from the steel brake line, at the point where the hose and line are attached to the frame, usin
